The dynamic effect of Micro-MHD convection on bubble grown at a horizontal microelectrode

Relatively low efficiency is the biggest obstacle to the popularization of water electrolysis, which is a particularly feasible way to produce super-pure hydrogen. Imposing a magnetic field can increase the hydrogen production efficiency of water electrolysis. However, the enhancement's detailed mechanism still lacks an insightful understanding of the bubbles' micro vicinity. Our recent work aims to understand why the micro-magnetohydrodynamic (MHD) convection hinders single bubbles' detachment on the microelectrode. A water electrolysis experiment by microelectrode is performed under an electrode-normal magnetic field, and dynamic analysis of the single bubble growing on microelectrodes is performed. The variation of bubble diameter with time in the presence or absence of the magnetic field was measured, and the forces acting on the bubble were quantified. The result shows that the micro-MHD convection, induced by Lorentz force, can give rise to a downward hydrodynamic pressure force that will not appear in large-scale MHD convection. This force can be of the same magnitude as the surface tension, so it dramatically hinders bubbles' detachment. Besides, the Kelvin force provides a new potential way for further improving the efficiency of water electrolysis.     

Current trends in structural development and modification strategies for metal-organic frameworks (MOFs) towards photocatalytic H2 production: A review

Photocatalytic H₂ generation using semiconductor photocatalysts is considered as a cost-effective and eco-friendly technology for solar to energy conversion; however, the present photocatalysts have been recognized to depict low efficiency. Currently, porous coordination polymers known as metal-organic frameworks (MOFs) constituting flexible and modifiable porous structure and having excess active sites are considered to be appropriate for photocatalytic H₂ production. This review highlights current progress in structural development of MOF materials along with modification strategies for enhanced photoactivity. Initially, the review discusses the photocatalytic H₂ production mechanism with the concepts of thermodynamics and mass transfer with particular focus on MOFs. Elaboration of the structural categories of MOFs into Type I, Type II, Type III and classification of MOFs for H₂ generation into transition metal based, post-transition metal based, noble-metal based and hetero-metal based has been systematically discussed. The review also critically deliberate various modification approaches of band engineering, improvement of charge separation, efficient irradiation utilization and overall efficiency of MOFs including metal modification, heterojunction formation, Z-scheme formation, by introducing electron mediator, and dye based composites. Also, the MOF synthesized derivatives for photocatalytic H₂ generation are elaborated. Finally, future perspectives of MOFs for H₂ generation and approaches for efficiency improvement have been suggested.     

Challenges in the CO2 emissions of the Turkish power sector: Evidence from a two-level decomposition approach

Decarbonization of the energy system is urgent to avert the disruptions in the climate. Considering its share, the low carbon transition of the power sector is pivotal. Growing electricity demand poses unique challenges for Turkey to enact deep decarbonization. It is vital to uncover the contributing causes of emissions to provide strategic oversight for carbon management activities. This study investigates key drivers of CO₂ emissions from the power sector using the Logarithmic Mean Divisia Index decomposition method. While efficiency improvement contributes to sustainable yet minor mitigation, changes in the fossil-fuel share indicate a cycling but significant overall impact.     

Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures.     

基于Abaqus的双裂纹不同间距对裂纹扩展速率的研究

扩展有限元法是近年经过大量运用的,在传统有限元的范围中求解不连续问题一种有效计算方法,它是基于单位分解的思想,在计算不连续问题时加入跳跃函数。以ABAQUS为平台,基于扩展有限元方法 (XFEM),以含双穿透型裂纹的有限宽板受横向拉伸载荷为力学模型,建立相应的裂纹尖端应力的有限元模型,研究焊接接头区域不同间距双裂纹相互作用对裂纹扩展速率的影响。结果表明:双裂纹间距的的大小并没有对裂纹的扩展速率产生影响。     

Coagulation process in Manchega sheep milk from Spain: A path analysis approach

Characteristics of sheep milk are of great interest for the dairy industry, as almost the totality of production is intended for cheesemaking. However, the existing relationships between these variables are complex. This study assessed composition, hygienic quality, coagulation properties, and curd yield of 1,200 individual Manchega sheep milk samples. The aim was to compare the effect of composition and hygienic quality on coagulation and curdling, and to evaluate the relationship between curd yields and the coagulation process and the effect of other features by using path analysis methodologies. Outcomes proved path analysis to be a useful and effective tool to assess these relationships through direct and indirect paths within the same model. Results showed that the factors that had a direct influence on milk coagulation were lactose concentration, casein content, and initial pH of milk. Contrastingly, somatic cells did not seem to have any effect (direct or indirect) on the coagulation process. Factors that directly affected curd yield were fat content, lactose concentration, casein content, and curd moisture. However, technological parameters showed little effect over curd yield.     

基于熵权物元模型的长三角幸福河层次评价

将幸福河概念与长江三角洲区域一体化发展战略相结合，基于自然、人类社会、人水关系3个系统构建了包含24个指标的长三角幸福河层次评价指标体系；引入需求层次理论，以基础Ⅰ层次、基础Ⅱ层次、提升Ⅰ层次、提升Ⅱ层次、幸福层次5个层次作为幸福河的层次评价等级，运用熵权物元模型，建立了长三角幸福河层次评价模型，并对2018年长三角三省一市幸福河层次等级进行了评价。结果表明，三省一市均处于转化中的中间状态，其中江苏省向提升Ⅰ层次转化，浙江省、安徽省向提升Ⅱ层次转化，上海市向幸福层次转化，说明区域整体幸福河层次处于较高水平，但稳定性较差。     

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Through a combined computational fluid dynamics and discrete element method approach, the effect of the operating parameters on the hydrodynamics and heat‐transfer properties of gas‐solid two‐phase flows in a spouted bed are extensively investigated. Considering the high velocity in the fountain region, gas turbulence is resolved by employing the large‐eddy simulation. The rolling friction model is adopted for more precise predictions of solid behavior near the wall. Subsequently, the gas‐solid flow patterns, gas‐solid velocities, and temperature evolution are investigated. Moreover, different operating conditions and geometry configurations are evaluated with respect to heat‐transfer performance. The results provide a fundamental understanding of heat‐transfer mechanisms in spouted beds.     

Numerical simulation analysis and experimental validation on wear/fracture mechanisms of polycrystalline cubic boron nitride superabrasives in high-speed grinding

In this study, a two-dimensional finite element model is proposed to investigate the wear/fracture mechanisms of polycrystalline cubic boron nitride (PCBN) superabrasives in high-speed grinding process. The special geometric microstructures of PCBN grains are constructed by using the classic Voronoi tessellation technique, and cohesive elements are embedded into the geometric model of PCBN grains as the potential crack propagation paths for simulating the wear/fracture behaviours of PCBN grains under grinding loads. The effects of uncut chip thickness per grain (a_gmax) on the stress distribution characteristics and wear/fracture behaviours of PCBN grains during grinding are discussed in detail. Results show that the wear behaviour of PCBN grains during grinding mainly occurs around the grain vertex region; however, the fracture behaviour, leading to the quick failure of PCBN grains, is prone to appear around the grain–filler bonding interface, which is usually on the opposite side of the in-feed direction. Moreover, to separate the PCBN grains from the macro-fracture during grinding, the uncut chip thickness per grain should be kept smaller than 1.0?µm to prevent the unfavourable fracture behaviour from appearing around the grain–filler bonding interface. Furthermore, the corresponding single-grain grinding trials are performed to validate the numerical simulation results by evaluating the wear/fracture morphologies of the PCBN superabrasives in the actual grinding operation.     

浓香型白酒窖泥放线菌的原位分离及代谢特性研究

以川南某浓香型白酒生产企业50年窖龄且发酵正常的窖泥为研究对象。通过高通量测序技术分析细菌群落结构以及放线菌群落结构,利用原位分离法从中分离得到2株放线菌,结合形态鉴定、生理生化和16S rRNA基因序列比对分析确定菌种属,并对其进行耐酸、耐乙醇特性研究,基于风味导向思路,分别对2株菌进行液态培养和固态培养,采用顶空固相微萃取法和气相色谱质谱联用对发酵挥发性产物进行分析,为放线菌的相关研究和应用提供理论参考。结果显示,放线菌在该窖泥样品含有较高操作分类单元(operational taxonomic unit,OTU),相对丰度达(10.7±3.4)%,且主要分布于链霉菌亚目(Streptomycineae)和科里氏杆菌亚目(Coriobacterineae)。采用原位分离法分离放线菌,将分离得到的2株菌编号为A1、A2,菌株A1鉴定为桑氏链霉菌(Streptomyces sampsonii),菌株A2鉴定为鲁地链霉菌(Streptomyces rutgersensis)。菌株A1、A2均可在pH>4.3或乙醇体积分数<6%的环境中生长。菌株A1在液态和固态发酵条件下都会产生大量土臭素以及萜烯类物质,菌株A2在液态条件下能产生多种酯类,其中己酸乙酯相对含量(5.384%)较高,而固态条件下能够检测出大量的3-羟基-2丁酮、2,3-丁二醇和吡嗪类物质。